Isleep 20i by Breas


Isleep 20i by Breas

iSleep 20i is an advanced, high-performance, self-adjusting CPAP that predictively identifies and treats obstructed breathing.


Settings/Performance
  • Device modes: Clinical, Home
  • Therapeutical modes:
  • iMode (self-adjusting)
  • CPAP
  • Pressure settings:
  • 4 to 20 cmH2O (CPAP mode)
  • Min pressure setting (Pmin) : 4 cmH2O to Pmin
  • Max pressure setting (Pmax): Pmin to 20 cmH2O
  • Ramp time:
  • 5 to 60 min The iSleep 20i is an advanced high performance self-adjusting CPAP that predictively identifies and treats obstructed breathing at a reduced mean pressure level compared to conventional CPAP
  • Ramp start pressure: 4 cmH2O to CPAP
  • Integrated heated humidifier: 1 to 9
  • Maximum flow in CPAP mode:
  • 6.7 cmH2O: 108 litres/min
  • 13.3 cmH2O: 132 litresl/min
  • 20 cmH2O: 132 litres/min
  • Maximum limited pressure during single fault condition: 30 cmH2O
  • Breathing resistance under single fault condition
  • 0.9 cmH2O at 30 litres/min
  • 3.2 cmH2O at 60 litres/min
  • Digital output: Serial communication (RJ45)
  • Sound level at 10 cmH2O: Less than 30 dB(A)
Indications
  • Internal function failure: Message on the display + audible
  • Power fail: Audible
  • Power Supplies
  • Mains supply: 100 to 240 V AC
  • External DC supply: 24 V DC, 12V adapter available
  • Standby power: 3 W
  • Operating Conditions
  • Recommended mask leakage: 20 to 40 litres/min at 10 cmH2O
  • Minimum mask leakage: 12 litres/min at 4 cmH2O
  • Dimensions
  • W x H x D: 173 x 172 x 209 mm (without humidifier HA 20)
  • Weight: 2,0 kg
  • Air outlet: 22 mm conical standard connector
10% off on Lumis 150 VPAP ST